Using Extention Mobility. A user want that when he is on a call, if a second Call arrives, caller should get busy tone instead of voicemail. Also the user wants that after he logs out of his phone using EM, that calls goes to Voicemail.
How can i achieve this? already setted busy trigger to 1, Forward Busy internal/external to voicemail. but doesnt meet what he wants.
The decision to Forward to Voicemail comes from the Logout profile. Have a look
User Device Profile
As system administrator, you configure a user device profile for each individual user. Using the Cisco CallManager User Options window, a user can access this profile and make changes, such as adding a service. You can add, modify or delete a user device profile in Cisco CallManager Administration.
When a user logs in to a phone that is configured for Cisco CallManager Extension Mobility and the user has a user device profile configured for that phone, the user device profile replaces the existing configuration of the device.
When a user logs out, the user device profile is replaced by the logout profile.
Logout Call Flow
This section describes the flow of events for the Cisco CallManager Extension Mobility logout from a system perspective. Understanding the call flow will help you troubleshoot any problems that you may have with the Cisco CallManager Extension Mobility feature.
1. A user presses the Services button on the Cisco IP Phone and requests to log out. This action invokes a URL for the Cisco CallManager Extension Mobility application.
2. The application determines the URL of the service.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...