SIP Trunk Diversion (Cfwdall) inserting Domain in the FROM header of the originating PBX
We recently performed an upgrade from 8.61 to 8.62. Since the upgrade, incoming off-net diversion (cfwdall) to the PSTN stopped working. Here is the call flow for our setup:
PSTN caller-->AVAYA CM SIP TLS-->AVAY SES SIP-->CUCM-->CFWDALL-->Avaya SES SIP TLS-->Avaya CM-->PSTN.
Calling from an internal SCCP Phone to another SCCP with CFWDall works fine. The problem is when a caller from the PSTN calls an SCCP phone with CFWDALL to PSTN cell phone the call fails at the Avaya with "407 Proxy Authentication required". I believe this because the FROM header has the domain of the Avaya and not the IP Address of CUCM.
Prior to the upgrade, the Diversion SIP INVITE FROM header has the ip address of the CUCM server:
I think this can be addressed with a SIP normalization script to replace the sip.avayadomain.com with the IP Address of the CUCM server sending the INVITE. I have yet have to implement a SIP normalization script and would like some expert help in creating the normalization script.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.