Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP UCM client for windows mobile

Is there a way to develope a SIP client, able to register on the UCM, running on windows mobile?

1 REPLY
Cisco Employee

Re: SIP UCM client for windows mobile

Hi!

There are some SIP clients that work, but in general 3rd-party is responsible for certification.

The HP iPAQ 510 is supported with CallManager 5.1. You can look for HPiPAQ500seriesVoiceMessenger and this one uses SIP.

There is a WM 6 SIP Stack Free Configuration Tool out there called SIP Conf Tool 2.0.1, never used it, but it

might help to get an idea.

IP Blue has a softphone for the Windows Mobile OS which is based on the Cisco SCCP protocol.

If you want to develop one, try this link and see if you can find something related to what you need:

http://developer.cisco.com/web/cdc/home

Also refer to:

http://forums.cisco.com/eforum/servlet/IPCApps;jsessionid=331079E0EC6AC9551CA8E1415BF30952.SJ4A?page=tpsipep

Hope this helps!

Regards,

Teresa.

Regards, Tere. If you find this post helpful, please rate! :)
373
Views
0
Helpful
1
Replies
CreatePlease login to create content