Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

spa5xxG phones and cucm 8.x

Someone can help me. It is possible to register cisco spa5xxG phones in CUCM 8.X? If yes, what is requirements and process

  • Unified Communications Applications
1 ACCEPTED SOLUTION

Accepted Solutions
Blue

spa5xxG phones and cucm 8.x

HI

SPA supports Session Initiation Protocol (SIP) and Smart Phone Control Protocol (SPCP). Natively CUCm do not support SPA phone. You can add them as third party SIp phones only in CUCM.

Regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
3 REPLIES
Blue

spa5xxG phones and cucm 8.x

HI

SPA supports Session Initiation Protocol (SIP) and Smart Phone Control Protocol (SPCP). Natively CUCm do not support SPA phone. You can add them as third party SIp phones only in CUCM.

Regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
New Member

spa5xxG phones and cucm 8.x

Thanks Ronack for your feedback. It is my first experience in CuCm. Can you indique me the process to add them as 3rd party sip phones?

Thx !

Blue

spa5xxG phones and cucm 8.x

HI

Very simple procedure to configure 3rd party sip phones.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmcfg/b09sip3p.html

Please rate Helpful posts.

Regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.
218
Views
0
Helpful
3
Replies
This widget could not be displayed.