Solved: spa5xxG phones and cucm 8.x

Roger_Nakoiri · ‎03-19-2012

Someone can help me. It is possible to register cisco spa5xxG phones in CUCM 8.X? If yes, what is requirements and process

ronpatel · ‎03-19-2012

HI

SPA supports Session Initiation Protocol (SIP) and Smart Phone Control Protocol (SPCP). Natively CUCm do not support SPA phone. You can add them as third party SIp phones only in CUCM.

Regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

View solution in original post

ronpatel · ‎03-19-2012

HI

SPA supports Session Initiation Protocol (SIP) and Smart Phone Control Protocol (SPCP). Natively CUCm do not support SPA phone. You can add them as third party SIp phones only in CUCM.

Regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Roger_Nakoiri · ‎03-19-2012

Thanks Ronack for your feedback. It is my first experience in CuCm. Can you indique me the process to add them as 3rd party sip phones?

Thx !

ronpatel · ‎03-19-2012

HI

Very simple procedure to configure 3rd party sip phones.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_0_1/ccmcfg/b09sip3p.html

Please rate Helpful posts.

Regards

Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.