Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Speed Dials and Abbreviated Dialing

Hi,

I have a 7975 IP Phone with two 7916 addons. I have set button 1 and 2 as Line and want to configure the other 54 buttons as speed dials. The 7975 Phone template only allows me 40 speed dials after choosing button 1 and 2 as line. Why this limitation when the physical Phone with addons have 54 buttons programmable for speed dials.

For Abbreviated dialing, customer would like to avoid printing out a sheet to see what abbreviated dial number corresponds to number been called. Anyway around this?

Running Unified Callmanager 6.1

2 REPLIES
Hall of Fame Super Red

Re: Speed Dials and Abbreviated Dialing

Hey Paul,

Here are the details for this issue. This has been fixed in CUCM 7.1(3) versions with the 8.5(3) firmware, but no other versions.

Cisco Unified Communications Manager 4.2(3)SR3a, 4.3(2), 5.1(3)b, and 6.1(1), 7.0 and 7.1

Total Number of Buttons Supported

Cisco Unified IP Phone 7975G = 42

Cisco Unified Communications Manager 7.1(3) / Cisco IP Phone Firmware 8.5(3) and later

Total Number of Buttons Supported

Cisco Unified IP Phone 7975G = 54

Cisco Unified Communications Manager Express 4.3 and later

Total Number of Buttons Supported

Cisco Unified IP Phone 7975G = 54

From this 7916 Data Sheet;

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/data_sheet_c78-468673.html

Hope this helps!

Rob

Community Member

Re: Speed Dials and Abbreviated Dialing

Thanks Rob

522
Views
0
Helpful
2
Replies
CreatePlease to create content