Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SRST in H323 and H323 Fallback

Hello guys,

Is it possible to have a branch with H323 Voice Gateway and H323 fallback, i just do not like MGCP, in other words instead of having an MGCP VGW with H323 fallback, i need an H323 VGW with H323 fallback.

Regards,

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: SRST in H323 and H323 Fallback

That is correct. If the branch office works with CUCM correctly in H323 mode… this typically means all your dial peers are correct for SRST (IE 9T for outbound, and voice translations setup for inbound digit strip and or prepending). You will need to configure call-manager fallback for SRST parameters. (as you would for MGCP)

4 REPLIES

SRST in H323 and H323 Fallback

Yes, simply add in the SRST commands on the gateway and in CUCM just as you would for MGCP.  IN h323, you have to create all the dial peers anyone.  SRST is basically H323.  MGCP is only used when talking with CUCM.   

New Member

SRST in H323 and H323 Fallback

Tommer,

Thank you for your feedback, so i can have an H323 VGW at branch, configure SRST on CUCM, register the IP Phones to the CUCM and upon WAN failure the IP Phones will fallback to the H323 VGW.

I will configure a SIP trunk between the H323 VGW and the CUCM to make calls though the WAN.

Regards,

Re: SRST in H323 and H323 Fallback

That is correct. If the branch office works with CUCM correctly in H323 mode… this typically means all your dial peers are correct for SRST (IE 9T for outbound, and voice translations setup for inbound digit strip and or prepending). You will need to configure call-manager fallback for SRST parameters. (as you would for MGCP)

New Member

Re: SRST in H323 and H323 Fallback

Tommer,

Thank  you for your feedback, now i have the guts to tell you E.A.G.L.E.S 

Regards,

1052
Views
5
Helpful
4
Replies
CreatePlease login to create content