Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

SRST on CM 6.0

Hello, im running a lab enviroment, i want to implement srst tm cm ip is 192.168.1.10, the default gateway and router on wich i want to enable srst is 192.162.1.1, i use on the router the commands

call-manager-fallback

ip source-address 192.168.1.1

and max ephones/dn

but it doesnt work, it doesnt appear on device configuration and when the cm is down there is no fallback

am i missing something??

Thanks in advance

Cesar

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: SRST on CM 6.0

Have you created the SRST reference and assigned to the DP??

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2 REPLIES
Cisco Employee

Re: SRST on CM 6.0

Have you created the SRST reference and assigned to the DP??

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: SRST on CM 6.0

nope, because i was using the default gateway, but i checked there and was set to disabled, so THANKS A LOT

161
Views
0
Helpful
2
Replies