Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SRST with FXO to Hunt Group

I am using CUCM 6.1 with SRTS to remote gateway.

The remote H323 gateway is using FXO ports, and in normal operation do a connection PLAR to a CUCM Hunt Group.

During SRTS, I would like the calls to ring to a single IP Phone. Is there a way to do this? Currently since using a PLAR to call manager DN, in SRST all incoming calls fail.

Thanks,

1 REPLY

Re: SRST with FXO to Hunt Group

You need to put in voice translations. Here is an example

voice translation-rule 100

rule 1 /\(.*\)/ /10000/

!

!

voice translation-profile voice

translate called 100

!

All calls coming in, ring extension 1000

Then the Translation rule is called "100"

Then we use the dial peer:

dial-peer voice 100 pots

translation-profile incoming voice

destination-pattern 9T

direct-inward-dial

port 0/0/0:23

In this case, we are using any POTS line use the translation profile incoming. The rest is just used for outbound.

Hope this helps!

164
Views
0
Helpful
1
Replies