Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SRV _cuplogin and IM Presence 9

Conflicting documentation for IM&Presence 9 indicates that cuploging can not be use on IM&Presence 9 but other info indicates that it can be used because jabber will use that record.

 

On lab production/ lab environment jabber was able to use that record and able to login on the proper IM server. Also on jabber flowchart cuplogin is used for server discovery.

 

Any ideas why all that confusing information?

 

Thanks

Alex

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

It all depends on which mode

It all depends on which mode you are deploying cups: legacy mode or UDS mode. If you deploy in legacy mode then jabber uses _cuplogin

Nb: in legacy mode you will have to define b your tftp servers in I'm and p server unlike in uds where they are auto discovered.

 

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
2 REPLIES
VIP Super Bronze

It all depends on which mode

It all depends on which mode you are deploying cups: legacy mode or UDS mode. If you deploy in legacy mode then jabber uses _cuplogin

Nb: in legacy mode you will have to define b your tftp servers in I'm and p server unlike in uds where they are auto discovered.

 

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

Good to hear. Now it make

Good to hear. Now it make sense those messages on the IM and Presence about legacy and non legacy mode :)

48
Views
0
Helpful
2
Replies
CreatePlease to create content