We are using Cisco Presence at office and at home (connection through VPN). I'm now at office and I can see status of my collegues but they (working at home) can't see my status. I restarted the Presence server but it didn't help. Can someone help me to figure out what the issue is?
You need to take into consideration that the two units each have a presence on the network. The active unit uses the system IP address and the MAC addresses of the Primary unit. The Primary Unit is determined by the unit that has the end of the failover cable marked "Primary" plugged into it. The standby unit uses the failover IP address and the MAC addresses of the Secondary unit. If a switchover occurs, the units swap the IP address and MAC addresses they are using so as to replace each other's presence on the network. This action is invisible to the network.
IntroductionCUCM Routing RulesDial String implementation PolicyCUCM Routing LogicSIP URI Call Routing Analysis+++ Case Study: 1 ++++++ Case Study: 2 +++Conclusion
Over the last few months, I have had the privilege of working on SI...
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...