Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

TCL Scripting

Is it possible to use TCL scripting to simulate Auto Attendant with Call Manager Express instead of using CUE Module. Customer doesn't want to buy CUE module, and would like to take advantage of TCL scripting.

4 REPLIES
Blue

Re: TCL Scripting

You should be able to. We use the old srst_CISCO.2.0.0.0.tcl canned script which normally sends calls to a defined pilot number, and when the number is unreachable it plays a greeting, and allows the caller to dial an extension, or 0 for an operator extension that is defined.

This script was designed to be used with SRST in a Call Manager environment, but it should work fine in CME. You could either modify the script, or just define a bogus unreachable number to turn on the autoattendant all the time.

Not sure if the this is still available as a download from CCO, but if you want it I could email it to you. It was SRST2.0.zip

Please rate helpful posts.

Community Member

Re: TCL Scripting

Hello dgahm,

I will appreciate if you could email to me. I just want to take a look at it.

Regards,

Blue

Re: TCL Scripting

I have attached the zip file.

Blue

Re: TCL Scripting

It looks like a more sophisticated solution is available for CME.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide_chapter09186a00802d23d1.html#wp2199824

Please rate helpful posts.

129
Views
5
Helpful
4
Replies
CreatePlease to create content