Time of Day Routing while allowing only some callers
I have a scenario and a problem to solve which can use your brain and experience.
It is an school environment where I am using TOD(Time of Day Routing) to route all inbound calls for a classroom to voice mail during instruction hours. Still I am allowing important School authorities to be able to call that class room even during TOD. This is configured and working properly.
Problem to solve: when there is a 911 call originated from that classroom going out, I need the E911 PSAP authorities be able to call back to that classroom without any problem even during instruction hours when TOD applies. I know the E911 PSAP calling number and I only want based on that source calling number allow the call to go to the classroom. Please let me know if you have done this before and how could this be done.
Re: Time of Day Routing while allowing only some callers
Is the CSS on your CER systems restrained by the ToD routing rule? Have you checked to see what happens if you apply the same routing controls on your CER system as you have for the "important School authorities". I would check there first.
Since you are using CER, the initial answering point on PSAP return calls should be directed to CER anyway.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...