Hi with CUE or IPCC script editor, I am able to write a script for incoming calls to company main number to ring a phone during business hours and go directly to after hour greeting when office is closed and on holiday.
How do I acheive the same with CUCM6.1 and Unity? I am thinking time of day routing on CUCM will help, but cannot get my head round how it will work exactly. I know how to define my time preiods, schedules and apply schedules to the partition assigned to the DN. I also understand the partition is only active to receive calls during the time periods defined in the schedule assigned to the partition.
My question is how to I get the call to route to a Unity Call handler and play after hours greetings, when a call comes into the main number after hours. I do not want a ring after hours, want it to go straight to Unity CH
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...