cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
471
Views
5
Helpful
4
Replies

Time of Unity Express

cg100668
Level 1
Level 1

We have a UC520 installed and we have found that the time of the Unity Express is not synchronising with that of the CCME in the UC520. We have the following configuration:

On Cisco CallManager Express:

configure terminal

ntp master 1

end

On Cisco Unity Express:

configure terminal

ntp server prefer

clock timezone

When we checked the CUE using the command:

show ntp associations

we get the following result:

sh ntp associations

ind assID status conf reach auth condition last_event cnt

===========================================================

1 20236 9014 yes yes none reject reachable 1

Any ideas? Any help will be much appreciated.

Regards,

Chandrasen

4 Replies 4

Hi Chandrasen,

You should replace:

ntp server prefer

with

ntp server x.x.x.x prefer

hth,

nick

Nick,

Thanks for the reply. Sorry I made a mistake in my last post. In fact the command has been properly input.

ntp server x.x.x.x prefer

Evern after reboot of the CUE module, the time shift is still there.

Any other idea?

Regards,

Chandrasen

Hi Chandrasen,

You could be hitting this bug: CSCsu36827

Try updating your IOS to 12.4(20)T2 and that may help.

You may also want to change your ntp source:

ntp source

hth,

nick

Nick,

Thanks. I will try to use an external ntp server. Thanks again.

Regards,

Chandrasen

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: