We are experimenting time problems with our Unity voicemail. We use to have a single Unity server and now we have installed a failover. Since then when our users listen to their messages, they hear random time stamp from the Unity notification message. If they save the message and hear it back, it give and other time stamp. Any idea where to look?
In fact it's the Unity time stamp that you hear just before the message. The time stamp goes completely random. For exemple if it supposed to say: "Message number one, today at 5 pm", it will say "Message number one, july 20th at 1 am".
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...