I've some troubles to configure a translation pattern as requested by the customer. In fact, we are migrating a customer to the Cisco IPT infrastructure. For the moment, they use a Nortel CS PBX - great
Well in the Nortel world, they have a feature called SYSPEED... You push on a button, you enter a code and a number will be called.
This is easy to configure by using for instance translation patterns. Now the complicated part, sometimes they have codes which refers to a root number. The user has to complete the code with the right extension of the person who he has to call.
Well to be more technical:
User A wants to call user B (who is on another site - so external call) - the code is *0001437 so it will call 0254825 (root) prepend with 437, so finally 0254825437. This is not so complicated to put in place!
Translation Pattern: *0001.XXX Discard digits: PreDot Called Party Transform Mask: XXX Prefix: 0254825
My question to you! How can I prepend n digits without knowing the length... Like *0001.! (for the translation) and something like ! in the called party transform mask.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.