Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

TSP 8.1(1) verify servers button does dr watson

Hi,

Have a server with 8.1(1) TSP and Unity 4.0(4) and all works fine, but when you go to TSP integrations and click on verify servers button it brings up the window and gets stuck on first port for 1-2 seconds then the integration application exits and goes away on it's own and there is a dr watson in event log.

Exception generated was c00000005 at address 01D02393 (TSPl_lineOpen)

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: TSP 8.1(1) verify servers button does dr watson

I believe this was a bug in the 8.1(1) release. See CSCsd20157 (http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsd20157)

You could either roll back to 8.0(2) or request an ES version of 8.1(1) from TAC.

Regards,

Eric

3 REPLIES
Cisco Employee

Re: TSP 8.1(1) verify servers button does dr watson

I believe this was a bug in the 8.1(1) release. See CSCsd20157 (http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsd20157)

You could either roll back to 8.0(2) or request an ES version of 8.1(1) from TAC.

Regards,

Eric

Re: TSP 8.1(1) verify servers button does dr watson

Thanks. It works fine as long as that function is not done. Is there a way you can post the ES for me when you get a moment? My id is my profile name here. If not, I'll just wait until the next TSP release.

Cisco Employee

Re: TSP 8.1(1) verify servers button does dr watson

Don't know if you got it yet, but it'll be avail shortly.

109
Views
0
Helpful
3
Replies
CreatePlease to create content