Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UC 2.0 fails to install on IBM x3250

I've opened a TAC ticket already, but I'd like to know if anyone has run into this.

The IBM x3250 is configured with the same hardware requirements as a cisco MCS7825I but the install procedure throws " Installation Error Unsupported Hardware" error.

Thanks,

Scott

2 REPLIES
New Member

Re: UC 2.0 fails to install on IBM x3250

Do you have 4Gb RAM installed? I just ran into this with an MCS-7835-H2 server.

The memory upgrade is listed here:

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/2x/installation/guide/2xcucig020.html#wp1049506

Check this link for Hardware compatability:

http://www.cisco.com/application/pdf/en/us/guest/products/ps6509/c1650/cdccont_0900aecd80372879.pdf

The IBM x3250 is listed for Overlay-1, so it should be OK.

Thanks, Randy

New Member

Re: UC 2.0 fails to install on IBM x3250

the x3250 only needs 1 gig for UC 2.0 according to the platform list.

The problem according to Cisco is that their version of x3250 is running BIOS 1.26 - IBM is now shipping 1.30. We will try to flash downgrade the bios.

110
Views
0
Helpful
2
Replies