UC to Unity Networking - Need to Share Phone Directories
I have a Unity Connection 8.X in the U.S. and want to be able to route calls coming into its AutoAttendant to Europe for phones/VM boxes who live off of the seperate Unity/CUCM cluster. Essentially, I just need to make the phone directory of the U.S. Unity Connection to be aware of, and how to reach the Unity Subscribers off of Unity in Europe. Would it be simply digital networking or do I need to look at VPIM? (I don't care about exchanging messages). The other option I was going to use (for down-and-dirty and since I have 1000 extra Subscriber licenses) is just to have the Europe Unity folks export their Subscribers, and I can import them into the U.S. Unity Connection (our CUCM clusters are trunked together and have 5-digit routing between them).
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...