Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UC500 call routing

Hi all,

I have UC500 configured to do calls with both SIP user agent and FXO, for outbound calls, my request is how can i route calls to mobile destination via FXO, and Fixe destination via SIP user agent

thanks in advance

Med

1 REPLY

Re: UC500 call routing

You can use the destination-pattern on your outgoing dial peers to choose which dial peer to use.

If you do not know the number of the 'mobile destination', you will not be able to do this. But, if there is a range of numbers, you can make the destination pattern something like this:

dial-peer voice 1 voip

destination-pattern [5-8]...9....

That would be any 9 digit number starting with 5 through 8 with the 5th number being a 9.

hth,

nick

137
Views
0
Helpful
1
Replies