Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UC500 fax problem.

Hi, i have a problem, i configurated the uc500 to recive fax to a extension... this have a dial-peer with

dial-peer voice 2001 voip

description ** cue auto attendant number **

translation-profile outgoing PSTN_CallForwarding

destination-pattern 777


no modem passthrough

session protocol sipv2

session target ipv4:

dtmf-relay sip-notify

codec g711ulaw

fax-relay sg3-to-g3

fax-relay ans-disable

fax rate disable

fax nsf 000000

fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco

no vad

when i try to pass a fax to the extension, start the negociation with the fax ( tones like modem ) but never finish, keep the tones and never get connected..

this is the debug::

Dec 27 16:44:25.923: 0/1/0 69715472 fr-entered=10(ms)

Dec 27 16:44:25.923: 0/0/0 (217) 69715474 fr-entered=10(ms)

timestamp=69716564 fr-msg-det NSF

timestamp=69716872 fr-msg-tx NSF

timestamp=69717764 fr-msg-det CSI

timestamp=69718072 fr-msg-tx CSI

timestamp=69718504 fr-msg-det DIS

timestamp=69718812 fr-msg-tx DIS

timestamp=69724694 fr-msg-det NSF

timestamp=69725002 fr-msg-tx NSF

timestamp=69725894 fr-msg-det CSI

timestamp=69726202 fr-msg-tx CSI

timestamp=69726634 fr-msg-det DIS

timestamp=69726942 fr-msg-tx DIS

timestamp=69733324 fr-msg-det NSF

timestamp=69733632 fr-msg-tx NSF

timestamp=69734524 fr-msg-det CSI

timestamp=69734832 fr-msg-tx CSI

timestamp=69735274 fr-msg-det DIS

timestamp=69735582 fr-msg-tx DIS

timestamp=69741984 fr-msg-det NSF

timestamp=69742292 fr-msg-tx NSF

timestamp=69743184 fr-msg-det CSI

timestamp=69743492 fr-msg-tx CSI

timestamp=69743924 fr-msg-det DIS

timestamp=69744232 fr-msg-tx DIS

please help!


Re: UC500 fax problem.

add the following modifications:

voice-port 0/0/0

connection plar 299

dial-peer voice 1 pots

incoming called-number .%


port 0/0/0

dial-peer voice 6 pots

destination-pattern 0T

port 0/0/0