Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

UC520/7965/7916 configue BLF/SD as on CCM?

Hi All,

Have a uc520 with a 7965/7916. The gui does not appear to allow programming blf/sd combo buttons. Seems they are 2 seperate entities. Also, when buttons are programmed as SD, the name appears on the 7916, but not when configured as Watch or Monitor(BLF settings). Am I missing something?

As always, any help would be appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: UC520/7965/7916 configue BLF/SD as on CCM?

Have you tried doing it via CLI?

The guide explains really well how to do this


HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk
HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2 REPLIES
Cisco Employee

Re: UC520/7965/7916 configue BLF/SD as on CCM?

Have you tried doing it via CLI?

The guide explains really well how to do this


HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk
HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: UC520/7965/7916 configue BLF/SD as on CCM?

Thanks for your help, javalenc

G

836
Views
0
Helpful
2
Replies
CreatePlease to create content