I have a UCCX script that was created when I was running version 5 of CCX but now I’ve upgraded to version 8.5 and the script no longer works correctly. I was able to get all of my other scripts to work but not this one.
Its main function is for holidays when we close the office. I would call it and the first thing it says “Normal business routing is in effect”, I enter my PIN, then select option 2 and that’s supposed to change the call routing so that incoming calls go directly to the answering service.
It works as far as I can call it and enter my PIN, then I enter option 2 but nothing happens, the call just terminates. I tried to do a Reactive Debug and it just goes directly to Terminate after I push option 2.
I’ve included the original script from v5.0 and also the updated script after I changed the DOC locations.
You cannot write to the document repository unless you have authenticated a user within the script. Whether you do this interactively or hard-code the extension and matching CUCM PIN within the script doesn't matter; the MIVR engine won't write unless a User variable has authenticated.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...