Just use a switch step and specify what you want to happen within each. If you have a large quantity of cases [called number posibilities] you can set variables instead that are used by only a single set of code following the switch step. For example, if you wanted to specify the CSQ name for each condition but nothing else would change, you could use a Set step to set the CSQ variable but keep all of the other code - such as the select resource step - intact following the switch step.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4