UCM 6.1 feature. Forward caller to alternate phone number
Does anyone know if there is a feature similar to ShoreTel's "find me"? If someone calls an unattended desk phone, the caller is forwarded to an second phone. If that person choose to not answer the call, the caller then gets forwarded back to the office phone's voicemail box.
Re: UCM 6.1 feature. Forward caller to alternate phone number
There is, but you need to enable Mobility for Single Number reach. Basically, when someone calls their deskphone, it will ring the remote destination phone such as a cell phone at the same time. If the person does not answer at their desk OR their remote destination (cell phone) it will pull back and go to voicemail off CUCM.
It's built into CUCM 6.x and 7.x. Works good, BUT, it takes up more PSTN services because of the inbound call then outbound to remote destination.
Users can program their own numbers in through the CCMuser page.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...