I have a HW conference bridge registered with my UCM, I created the MRGL and MRG and added it to the phones. However every time a user tries to setup an AD HOC conference call, he gets a fastbusy and he lost the call. I had the same problem before and I don't remember quite good, but It was the steps we took on how to configure the GW, the profile and the version is like 4.1 the latest one, if you could point me on the right direction that would be great
If you just set it up, you may need to reset all the device pools. The phones do not pickup the MRG when you add it, it only picks it up upon reboot of the phone or download.
If the CFB is registered from the router to CUCM, and your added it into the MRGL, etc.. it should work. Sometimes all those lists and pools need a restart for it start working. I know with MOH, it's the same thing. Restarts, restarts, restarts
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...