Hi all,
I tried to use a analog phone on a Cisco ATA 186, it doesn't work.
here a piece of the configuration:
!
ephone-dn 6
number 636
name FAX1
!
ephone-dn 7
number 637
name FAX2
!
ephone 5
mac 001E.7AC3.F5F3
type ata
max-calls-per-button to 2
button 1:6
!
ephone 6
mac 1E7A.C3F5.F301
type ata
max-calls-per-button to 2
button 1:7
!
The ATA is correctly registered:
CEFRANI01#sh ephone ata
ephone-5[4] Mac:001E.7AC3.F5F3 TCP socket:[5] activeLine:0 REGISTERED in SCCP ver 0/0
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:6
IP:10.33.31.105 3624 ATA Phone keepalive 24 max_line 1
button 1: dn 6 number 636 CH1 IDLE
Preferred Codec: g711ulaw
ephone-6[5] Mac:1E7A.C3F5.F301 TCP socket:[-1] activeLine:0 DECEASED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:2
IP:10.33.31.105 2214 ATA Phone keepalive 27 max_line 1
button 1: dn 7 number 637 CH1 IDLE
Preferred Codec: g711ulaw
What i'm doing wrong?
thx
