01-12-2008 10:12 AM - edited 03-18-2019 08:19 PM
What do you need to configure in CCM 6.X in order to make the SPBLF to show the status of the call ?
if you could point me to a doc. I'll appreciated it
Solved! Go to Solution.
01-12-2008 11:10 AM
Hi Cris,
Here is some reference material;
Cisco Unified CallManager Features and Services Guide
Check under Presence Section
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmfeat/fsgd.pdf
Good note from Arief;
Hope this helps!
Rob
01-12-2008 11:10 AM
Hi Cris,
Here is some reference material;
Cisco Unified CallManager Features and Services Guide
Check under Presence Section
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmfeat/fsgd.pdf
Good note from Arief;
Hope this helps!
Rob
01-12-2008 11:59 AM
It was very useful, I just have a question.
What do I need to put in the Subscribe CSS
what partitions, do I need to configure a special partition or just add the partition that all of my lines have assigned.
I think that's the only thing I'm missing. its not working yet
thank you for your quick assistance
01-12-2008 12:11 PM
It is working, the information provided was very useful
you're the man
01-12-2008 03:35 PM
Hi Cris,
Thanks man!
Nice work here my friend! It's always a good day when we get something working :) This is one of the nicer new CCM features.
Take care,
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: