Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unified Communications 6.x

how do I upgrade my callmanager to the latest version, I already downloade the part 1 and 2 of the upgrade and burned it in a DVD, however when i go to OS administrator and try to upgrade the first node, I need to specify a directory and I don't know how to go from there.

any help is appreciated

6 REPLIES

Re: Unified Communications 6.x

Are you attempting an upgrade from windows version CM (3.x/4.x) to CM 6.0

New Member

Re: Unified Communications 6.x

no I'm running CM 6.0.1.2000-3 and I want to upgrade to 6.0.1.2000-4

Re: Unified Communications 6.x

You can download the bin file from CCO and then go to OS administration, software upgrades menu and upload it via SFTP or via a DVD/CD media.

New Member

Re: Unified Communications 6.x

How do you go about the upgrade with 2 x 1.1gb files over SFTP.

Are you able to upload them both and then they find themselves in the inactive partition ready for reboot into that partition?

New Member

Re: Unified Communications 6.x

Kim,

once you downloaded the 2 parts you need to open a dos prompt and run the following commmand if you are on windows, go to the directory where you have the 2 1.1 gig files and execute the following command

COPY /B UCSInstall_UCOS_6.1.2.1000-13.sgn.iso_part1of2+UCSInstall_UCOS_6.1.2.1000-13.sgn.iso_part2of2 UCSInstall_UCOS_6.1.2.1000-13.sgn.iso

just copy paste it and this command will make the 2 files only 1 iso that you will be able to upload to the callmanager through SFTP

hope this helps

New Member

Re: Unified Communications 6.x

Thanks Cris, I eventually found this info in the readme PDF for the download.

232
Views
6
Helpful
6
Replies