If customer specifies that they won't increase the Exchange systems then I take this to mean that we have to build the storage systems for UM messages and still provide integration to Exchange. for Unity. Does that mean that we as a vendor will have to allocate additional hardware for mailbox storage, and then integrate that with the customer's existing Exchange Infrastructre.
Is there a way to still provide integration with Exchange if the servers are not located at the core sites? I thought the Unity servers had to be located right along side of each Exchange server for UM.
Actually, it is one of the requirements; the Exchange must be on the same LAN as the Unity server, you CANNOT use a WAN link for this purpose, no matter the speed that you have. This will create a severe impact on the messages retrieval, like delays, MWI not refreshing...
By the way, this is not TAC supported.
He should get a local Exchange server next to the Unity server and configure this one as the Unity Partner Exchange so Unity will not experience any delays.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...