Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Unity 4.0.3 stops cannot restart, although all user functions ok

Get the symbol saying Unity stopped,and cannot get to the system admin or status monitor pages, get the following error

on the sys admin page

Server.CreateObject(AvSaLocalization.AvSaLocalization.1) failed.

This is most likely an error with a DLL, probably AvSaLocalizationSvr.dll or perhaps AvSaLocaleInfoSvr.dll.

Check that these files are present, and registered with REGSVR32.

Also be sure that the appropriate MsgStoreRes.dll file is present.

Cannot continue.

(From: Global.asa: hr=0x80010105)

this problem occurs about 2 or 3 times per week, only way round it is to restart using the Unity restart tool

3 REPLIES
Silver

Re: Unity 4.0.3 stops cannot restart, although all user function

have you tried registering the dll's in a command window?

When I have seen this error I have also had success restarting IISAdmin service and letting in restart other services. I think the main one is WWW service cause it seems to hang. However, it works and Unity does not need restarting..

rlp

ps there is a SA Admin troubleshooting document also on cisco.com

Re: Unity 4.0.3 stops cannot restart, although all user function

I can restart the IIS service, which controls other services, but that does not make any difference to the SA admin, unity will still not restart by clicking on the icon in the toolbar

I wll have a look at the SA admin troubleshooting doco.

New Member

Re: Unity 4.0.3 stops cannot restart, although all user function

Hi

Did you have any joy with this issue? We're experiencing the exact same thing. Started happening after a TSP upgrade.

Any advice you could offer would be welcomed.

June

122
Views
0
Helpful
3
Replies
CreatePlease login to create content