Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Unity 4.0(5) upgrade questions

We have a Unity server with failover configured. Off box exchange and ad.

Voice mail only environment. These boxes are currently running server 2000. We plan on getting a Dirt backup off the secondary server and then reloading the servers to server 2003. Then reinstalling Unity 4.0(5) and doing a Dirt restore. Then do a upgrade to Unity 5.0(1). My question is once we have loaded 2003 and Unity 4.0(5). Do we do Dirt restore on both boxes and setup failover between them before we continue with the Unity

5.0(1) upgrade.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Unity 4.0(5) upgrade questions

You will restore only to the primary server and then setup failover on the primary and secondary servers. See the following link.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge150.html#wp1227946

Hope this helps. If so, please rate the post.

Brandon

1 REPLY

Re: Unity 4.0(5) upgrade questions

You will restore only to the primary server and then setup failover on the primary and secondary servers. See the following link.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge150.html#wp1227946

Hope this helps. If so, please rate the post.

Brandon

101
Views
0
Helpful
1
Replies
CreatePlease to create content