Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Unity 4.04 - which to download?

I'm needing to upgrade our 4.0(2) machine to 4.0(4) before moving to a new machine and up to 5.x.

Anyway, I'm looking in the Unity Archives in the Download section and see three different CD images:

CD1 - Image Application

CD2 - Voice Board

CD3 - Image ENU

Do I need all of these to complete an upgrage to 4.0(4)?

3 REPLIES
Hall of Fame Super Red

Re: Unity 4.04 - which to download?

Hi Scott,

You always need CD 1 and CD 3. You need CD 2 only when you are using voice cards to integrate Cisco Unity with a circuit-switched phone system.

Downloading Cisco Unity 4.0(4) CD Images

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/404/release/note/cu404rn.html#wp34865

Hope this helps!

Rob

Cisco Employee

Re: Unity 4.04 - which to download?

Hi,

As per the Release Notes, Table 2, for Unity 4.0.4,CD1 and CD3 are required for installation, but CD2 is only required if you are installing voiceboards: http://www.cisco.com/en/US/docs/voice_ip_comm/unity/404/release/note/cu404rn.html

I hope this helps.

New Member

Re: Unity 4.04 - which to download?

So....I downloaded all three CD images.

I need to install the data store though. Does that come on those CD's? Looking through the link provided by sopayne, I'm seeing info on MSDE 2000 SP3a, but that's about it.

Do I use my Data Store 2000 CD from my old Unity installs? (I tried this buit it asks for a CD Key, there isn't a key on any of the CD sleeves...)

112
Views
8
Helpful
3
Replies
CreatePlease to create content