Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity 4.1(2) - changing LAN IP address

Afternoon all,

I wish to relocate an old Unity server of ours to a new location which involves changing the IP address, subnet and default gateway of the physical server.

The CUCM cluster integration with Unity will remain the same. Also, the subscriber accounts will also remain the same.

Will I be ok to change the NIC card settings and reset the voicemail ports without too much disruption? Is there anything else I need to consider?

Thank you kindly.

Regards,

Jamie

Everyone's tags (2)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Unity 4.1(2) - changing LAN IP address

Have you reviewed the documentation on that??

Changing the IP Address of a Cisco Unity  Server

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/42/upgrade/guide/ex/ru_090.html

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Unity 4.1(2) - changing LAN IP address

Also check to make sure this server is not Voicemail only setup.  If it is, you will have many windows problems.  The IP is linked to Exchange, DNS, AD, etc within the system.  If the Unity server is a member server, the document above will work fine.  You will need to reboot the system like any MS Windows server once you change the IP address.  Unity after reboot will connect CUCM and register the ports again (if you are using SCCP for VM ports)

3 REPLIES
Cisco Employee

Unity 4.1(2) - changing LAN IP address

Have you reviewed the documentation on that??

Changing the IP Address of a Cisco Unity  Server

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/42/upgrade/guide/ex/ru_090.html

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Unity 4.1(2) - changing LAN IP address

Thank you kindly. Most helpful.

Regards,

Jamie

Unity 4.1(2) - changing LAN IP address

Also check to make sure this server is not Voicemail only setup.  If it is, you will have many windows problems.  The IP is linked to Exchange, DNS, AD, etc within the system.  If the Unity server is a member server, the document above will work fine.  You will need to reboot the system like any MS Windows server once you change the IP address.  Unity after reboot will connect CUCM and register the ports again (if you are using SCCP for VM ports)

412
Views
0
Helpful
3
Replies
CreatePlease login to create content