Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Unity 4.2.1 Bulk Edit

Is it possible to bulk edit the cos setting on a subscribers profile?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Unity 4.2.1 Bulk Edit

Hi Daniel,

This cannot be changed via Bulk Edit, but you can use the method shown below :)

To Assign or Reassign Subscribers to a Class of Service

--------------------------------------------------------------------------------

Step 1 In the Cisco Unity Administrator, go to any Subscribers > Class of Service page.

Step 2 Click the Find icon.

Step 3 Double-click the name of the class of service to which subscribers are currently assigned.

Step 4 Go to the Subscribers > Class of Service > Subscribers page.

Step 5 Click Assign or Reassign, as applicable.

Step 6 Enter the name of a subscriber. You also can enter * for a list of all subscribers, or enter one or more characters followed by * to narrow your search.

Step 7 Click Find.

Step 8 From the list provided, select the names of the subscribers to be assigned or reassigned. To select more than one name, hold down the Ctrl or Shift key.

Step 9 Do one of the following actions, as applicable:

•Click the Assign button.

•Select the applicable class of service, and then click the Reassign button.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/administration/guide/ex/5xcusag170e.html#wp1048475

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: Unity 4.2.1 Bulk Edit

Hi Daniel,

This cannot be changed via Bulk Edit, but you can use the method shown below :)

To Assign or Reassign Subscribers to a Class of Service

--------------------------------------------------------------------------------

Step 1 In the Cisco Unity Administrator, go to any Subscribers > Class of Service page.

Step 2 Click the Find icon.

Step 3 Double-click the name of the class of service to which subscribers are currently assigned.

Step 4 Go to the Subscribers > Class of Service > Subscribers page.

Step 5 Click Assign or Reassign, as applicable.

Step 6 Enter the name of a subscriber. You also can enter * for a list of all subscribers, or enter one or more characters followed by * to narrow your search.

Step 7 Click Find.

Step 8 From the list provided, select the names of the subscribers to be assigned or reassigned. To select more than one name, hold down the Ctrl or Shift key.

Step 9 Do one of the following actions, as applicable:

•Click the Assign button.

•Select the applicable class of service, and then click the Reassign button.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/administration/guide/ex/5xcusag170e.html#wp1048475

Hope this helps!

Rob

Community Member

Re: Unity 4.2.1 Bulk Edit

Worked like a charm Rob!~ Your the best.

Hall of Fame Super Red

Re: Unity 4.2.1 Bulk Edit

Hey Daniel,

You are most welcome my friend! Glad to be of some small help here.

Cheers!

Rob

160
Views
0
Helpful
3
Replies
CreatePlease to create content