08-28-2008 09:44 AM - edited 03-18-2019 09:32 PM
Can Unity 4.2 be installed on a windows exchange 2003 server? I know that when you are building failover into your design you need a third box to funcion as the message store, but what about a stand alone voicemail only environment?
Any feedback would be greatly appreciated.
Thank you.
Rgds,
Vicky
08-28-2008 09:54 AM
Hi Vicky,
Exchange Requirements-Message Store
Exchange as the message store is supported in the following Cisco Unity 4.2 configurations, with the required software listed below:
Unified Messaging
â¢Exchange 2003 on a separate server
â¢Exchange 2000 on a separate server
Voice Messaging
â¢Exchange 2003 on the Cisco Unity server or on a separate server. If you want to install Exchange 2003 on the Cisco Unity server, note the following:
-The Cisco Unity server must be running Windows Server 2003.
-Exchange 2003 can be installed only on the currently shipping servers supported for use with Cisco Unity 4.2 (MCS-78xx-x2, MCS-78xx-x3, or later, including IBM and HP equivalents). Currently shipping servers are listed in the Cisco Unity Supported Platforms List at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_data_sheets_list.html.
â¢Exchange 2000 on the Cisco Unity server or on a separate server
From this excellent doc;
Cisco Unity 4.2 System Requirements
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/42/requirements/42cusysreq.html#wp472166
Hope this helps!
Rob
08-28-2008 10:42 AM
Excellent!! Thank you for this info!
08-28-2008 09:55 AM
Yes, you can have a offbox/onbox Exchange 2003 environment with voicemail only functionality.
Here is the install Guide for you.
08-28-2008 10:41 AM
Excellent. Thank you for the info.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: