Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Unity 4.2 on an Exchange 2003 platform

Can Unity 4.2 be installed on a windows exchange 2003 server? I know that when you are building failover into your design you need a third box to funcion as the message store, but what about a stand alone voicemail only environment?

Any feedback would be greatly appreciated.

Thank you.

Rgds,

Vicky

4 REPLIES
Hall of Fame Super Red

Re: Unity 4.2 on an Exchange 2003 platform

Hi Vicky,

Exchange Requirements-Message Store

Exchange as the message store is supported in the following Cisco Unity 4.2 configurations, with the required software listed below:

Unified Messaging

•Exchange 2003 on a separate server

•Exchange 2000 on a separate server

Voice Messaging

•Exchange 2003 on the Cisco Unity server or on a separate server. If you want to install Exchange 2003 on the Cisco Unity server, note the following:

-The Cisco Unity server must be running Windows Server 2003.

-Exchange 2003 can be installed only on the currently shipping servers supported for use with Cisco Unity 4.2 (MCS-78xx-x2, MCS-78xx-x3, or later, including IBM and HP equivalents). Currently shipping servers are listed in the Cisco Unity Supported Platforms List at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_data_sheets_list.html.

•Exchange 2000 on the Cisco Unity server or on a separate server

From this excellent doc;

Cisco Unity 4.2 System Requirements

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/42/requirements/42cusysreq.html#wp472166

Hope this helps!

Rob

New Member

Re: Unity 4.2 on an Exchange 2003 platform

Excellent!! Thank you for this info!

New Member

Re: Unity 4.2 on an Exchange 2003 platform

Yes, you can have a offbox/onbox Exchange 2003 environment with voicemail only functionality.

Here is the install Guide for you.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/installation/guide/cueum2k3nf/IG_018.html#wp1805346

New Member

Re: Unity 4.2 on an Exchange 2003 platform

Excellent. Thank you for the info.

109
Views
9
Helpful
4
Replies
CreatePlease to create content