If you upgrade Exchange 2003 to sp2, you need to run the Exchange 2003 sp2 on the Unity to update the Exchange tools or it could break things. Other than that, having the Unity OS on 2003 SP1 shouldn't be an issue.
Thanks all for the replies. I know the "Right thing to do" is to go with SP2, however the customer wasn't prepared to do the patch last night. TAC told me we should be able to get away without it for the short term, but should make plans (which we did) to get it applied. THey also said that SP2 can safely be applied to Unity (Exchange Tools Only) and leave Exchange at SP1 as SP2 (Tools) is backward compatible.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...