Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unity 4.x to 5.0 Upgrade --- Question about accounts and passwords needed.

I am upgrading a Unity system (unified communications with Exchange 2003) that was set up by someone else from 4.x to 5.0. I have the login account and password for the OS (windows administrator), and I also have the account for the Unity web administration. Other than that, I do not know any other accounts or passwords. There is someone else that administrates the Exchange side of the configuration. Do you know if I will encounter any problems with the upgrade, or a way for me to check the other possible accounts used for the Unity Installation?

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Unity 4.x to 5.0 Upgrade --- Question about accounts and pas

You will need the unityinstall account for the upgrade.

All the users are in your AD, attached is information about the users you need to have in the system, which services use them and how to reset the passwords if needed.

The name of the users might not be the same in your system but most users follow the guide using those names to avoid confusion.

Creating Accounts for the Installation and Granting Permissions

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity/5x/installation/guide/umexnofo/5xcuigumenofo070.html

Appendix: Cisco Unity 5.x Services

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcurugeappb.html

How to Change the NT Password for the Exchange and Unity Service Accounts

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a0080093f54.shtml

HTH

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
1 REPLY
Cisco Employee

Re: Unity 4.x to 5.0 Upgrade --- Question about accounts and pas

You will need the unityinstall account for the upgrade.

All the users are in your AD, attached is information about the users you need to have in the system, which services use them and how to reset the passwords if needed.

The name of the users might not be the same in your system but most users follow the guide using those names to avoid confusion.

Creating Accounts for the Installation and Granting Permissions

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity/5x/installation/guide/umexnofo/5xcuigumenofo070.html

Appendix: Cisco Unity 5.x Services

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcurugeappb.html

How to Change the NT Password for the Exchange and Unity Service Accounts

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_tech_note09186a0080093f54.shtml

HTH

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
113
Views
0
Helpful
1
Replies