05-07-2008 12:00 PM - last edited on 03-25-2019 09:27 PM by ciscomoderator
We currently have Unity 5.0 with failover working perfectly. We need to change the Ip address of the secondary server. Is there anything special that needs to be done besides changing the IP address on the Server NIC?
05-07-2008 12:03 PM
You will probably have to re-run the failover setup again, or remove it and rerun it again.
05-07-2008 12:52 PM
Hi Michael,
Just to add a note to the good info from Tommer (Hope all is well Tommer! Any crazy installs lately?)
I thought this might help;
Reconfiguration and Upgrade Guide for Cisco Unity Release 5.x
Changing the IP Address of a Cisco Unity or Voice-Recognition Server
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcuruge090.html#wp1124930
Hope this helps!
Rob
05-07-2008 12:56 PM
Thanks Tommer and Rob. Well serving of points
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: