Is there a service that is required to be configured in CallManager for the Visual Message Locator / Phone view service to work?
I've followed the other docco to setup the CTI user etc, and Unity, but dont know how to access the service!
Also, is IMAP supported for Exch 2007, I have checked out the cisco doc, and it says 2000 and 2003 are supported for IMAP, but doesnt mention 2007. Doc also doesnt have a published date on it, so i dont know if it is old.
I was originally assuming that Phone View would be a Service URL in CallManager that the user would browse to through the services button.
But the user actually has to dial into voice mail normally by hitting the messages button, then they press 5 for Find Messages. This then displays a list of messages in their mailbox on their phone display.
I dont think you can access it directly through a URL. (That would actually be my preference)
Also if you are looking at any of these new features.. avoid the message monitor.. it adds significant delay to the caller when they are trying to leave a message. Dont know if this will change in the future.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...