The Unity directory service account needs to update specific user/class attributes when importing a user into Unity. I don't know without checking further if an INetOrgPerson account has the same attributes. You can check a normal user account that has been successfully added to Unity using ADSIEdit to inspect the CiscoEcsbu_ specific attributes such as DTMFAccessID (user's extension) or other attributes and compare those to the INetOrgPerson account. Other thing to check in ADUC is the Security tab of the account and ensure the Unitydirsvc account and Unitymsgstoresvc account have the necessary permissions. And you can run SYSCHECK from the unity server, using the unitymsgstoresvc account to try adding a user.
Sorry for the slow reply. I thought I'd set it to email me on reply!
The rights seem to be present. I've checked the object in ADSI Edit, and none are present - which I'd expect given that Unity hasn't touched this account. Telephone number is present, as are other fields it needs (names, etc).
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...