cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
444
Views
0
Helpful
2
Replies

Unity 5.X : Configure changes on Inactive server

csshenoy80
Level 2
Level 2

Hi

We have Unity 5.X with Failover ( 2 Nodes). On the failover server - with automatic failover configured. The message " This Cisco Unity server is an inactive failover server. Most pages will not let you make changes. To make changes, use your active server XXXXXXXXX.

Changes can be made to the Integration, Ports, and Voice Recognition pages, if applicable"

Is this normal?

Thanks.

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi KA,

This is expected behaviour :) You have to keep in mind that in the "Failover" relationship, the Primary server is considered the Publisher and the Secondary server is the Subscriber. Most changes are made on the Publisher and replicated across to the secondary or "Failover" server.

You can test this out using the steps in this guide;

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/403/failover/guide/ex/FG_030.html#wp1131396

Hope this helps!

Rob

View solution in original post

2 Replies 2

Rob Huffman
Hall of Fame
Hall of Fame

Hi KA,

This is expected behaviour :) You have to keep in mind that in the "Failover" relationship, the Primary server is considered the Publisher and the Secondary server is the Subscriber. Most changes are made on the Publisher and replicated across to the secondary or "Failover" server.

You can test this out using the steps in this guide;

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/403/failover/guide/ex/FG_030.html#wp1131396

Hope this helps!

Rob

Thank you.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: