Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Unity 5.x Failover - FailTCPConnect

This event points to network problem?

Event Type: Information

Event Source: CiscoUnity_TSP

Event Category: None

Event ID: 145

Date: 1/2/2009

Time: 2:25:43 PM

User: N/A

Computer: xxxxxxxxx


Cisco Unity-SCCP TSP device 20 (Cisco Unity port 16): Connected to CUCM server This is not the primary CUCM server in this cluster, so Cisco Unity will periodically attempt to failback to the primary server, if configured to do so.

Failover Technical Details: FailTCPConnect

The Cisco Unity-SCCP TSP version is 8.3(1.0)

Cisco Employee

Re: Unity 5.x Failover - FailTCPConnect

If you have many of them, then possibly. What this is saying is that you have another CUCM in your UTIM listed as the primary CUCM you want your ports to connect with. Right now, port 16 is connected but it is connected to a CUCM that is not your primary designated CUCM. If your CUCM cluster is configured right, then this should affect any functionality as the ports seem to be registered with another CUCM that should be able to communicate with the Unity. Regardless, something is up with connectivity to your primary CUCM and you should investigate it.


Re: Unity 5.x Failover - FailTCPConnect

this is happening on multiple ports,

what would happen to a active call in such a scneraio, would it disconnect or failover?