One of our customer has CM 6.x , Unity 5.x and Mitel SX 200 . Thye have Unity for CM phones since they like Unity they want to do dual integration now for VM.
CM integration no problem now for Mitel do we have to go with Analog PIMG's with SMDI connection ??because I couldn't find any documents on Cisco to do digital PIMG's for Mitel SX200.
I was also reading little about QSIG trunking with ISR's and integration with Unity 5.x and PBX, Can we use that here and eliminate PIMG ? If we use this how do you integrate this ISR with Mitel a regular QSIG T1 for voice ports or ?
I saw this too but integration with Unity and Mitel using Dialogic Cards, I don't think this will work because if you check the supported hardware , dialogic cards won't work well with Win 2003 and Unity 5.x needs Win 2003 OS.
Since Cisco doesn't yet have their own documentation for PIMG with the sx200, you might touch base with your account team. I suspect it is simply a matter of whether Cisco has had the hands-on opportunity to document it.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...