Ok. We have a slight issue. What does the Ex2k7Script do (step 14 page 8-9 in Unity 5xcuigumefoxxx book)? We are wanting to set up a Change Control window where we will need the client to run the script on the Exchange Server 2007. They won't set up the change control until we tell them what the script does. Any help here would be GREATLY appreciated!
Yes, you would only run the script once on the Exchange 2007 server chosen to be the Cisco Unity servers partner Exchange server.
It will create Active Directory accounts in Active Directory for the default accounts which will replicate to all domain controllers and create associated Exchange Mailboxes on the partner Exchange server.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...