When you set the schedule - you have to set the backup user and credentials. This user must have full access to the DB. If you are writing to a shared drive, you'll want to do 2 step. Do you have all those bases covered?
Basically, you need to run the Disaster Recovery tools with an account that has proper rights to access SQL and, if messages are selected for backup, Exchange mailboxes. Please see the section ?Configuring Permissions for DiRT?.
Yes, Unity uses the Windows scheduler. Make sure you enable the backup as well. Check the links Rob provided. DiRT shouldn't be too hard to get going unless you have something else going on. You could also try to install the latest version of DiRT and see if that takes care of whatever issue you are having...although I'm not usually a fan of this approach unless it's last ditch because you may simply mask a problem elsewhere if you get into the habit of doing this sort of thing regularly. But installing the latest DiRT tools is fairly benign.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...