Unity 7.0.2 - exchange 08 - Voice mail attatch in an attatch e-mail
This is a new install CCM 7.0.2 with Unity 7.0.2. Exchange 2008 If I leave a message to a voice mail and I go to the mailbox of this user, I see an e-mail that have an attach e-mail with the voice mail inside.
Basicly, I have to open the e-mail, I have to open the e-mail attatch to the first e-mail and then open the voice mail.
any idea why the voice mail is not straight in the first mail ?
Re: Unity 7.0.2 - exchange 08 - Voice mail attatch in an attatch
This sounds like there may be something inspecting/archiving/scanning the voice mail and re-packaging it back up. Do you have some sort of process doing this on Exchange? Unity doesn't send an email within an email. It simply sends an email with the .wav file attachment and the message class should be of type IPM.Note.Voice.Unity. If it's anything other than that, you know its being modified somewhere.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...