Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Unity 7.0.2 Secure Messaging problem

I'm getting the following error message while running dbWalker utility:

"an entry in the server table has a NULL EncryptionPublicKey column. Server Name=XXXXXXXX. If this server is running 4.0(5) or later, and is enabled to send or receive private secure messages, then private secure messages will fail on that server. Troubleshoot for AD replication issues and install a new certificate on the server, if needed, by using the Commserver\Utilities\CiscoUnitySrvrCertMgrAssignConfCert.exe utility"

This utility is not there on the server (even that folder is not located under Utilities folder) and of course Secure messaging is not working, please help.

Thanks

  • Unified Communications Applications
2 REPLIES
New Member

Re: Unity 7.0.2 Secure Messaging problem

any resolve for this?

Cisco Employee

Re: Unity 7.0.2 Secure Messaging problem

CSCsl17805

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl17805

DBwalker is falsely reporting CiscoUnitySrvrCertMgrAssignConfCert.exe utility for Unity 5.0(1).

Symptom:

The following error is seen in DBwalker output -

0:(warning) an entry in the server table has a NULL EncryptionPublicKey column. Server

Name=. If this server is running 4.0(5) or later, and is enabled to send or

receive private secure messages, then private secure messages will fail on that server.

Troubleshoot for AD replication issues and install a new certificate on the server, if

needed, by using the Commserver\Utilities\CiscoUnitySrvrCertMgrAssignConfCert.exe utility.

CiscoUnitySrvrCertMgrAssignConfCert.exe only exists in Unity 4.0(5), 4.1(1), and 4.2(1) not 5.0.

Conditions:

Unity 5.0(1) with DBwalker 4.0.46

Workaround:

Restart the CuMessageAgingSvr service from the Services Control Panel on Unity 5.0(1) systems to recreate the keys on the server

237
Views
0
Helpful
2
Replies